Skip to content
Cost guide11 min read

Cost to Paint Kitchen Cabinets in NYC (2026 Prices)

Cost to paint kitchen cabinets in NYC: 2026 prices per door and by kitchen size, paint vs reface vs replace, the best paint and sheen, plus a free estimate.

By
DecoStyle USA
Published
Reading time
11 min

The cost to paint kitchen cabinets in NYC typically runs $100–$175 per door (both sides, sprayed) and $40–$80 per drawer front. That puts a small kitchen or apartment galley with about 15 doors and 6 drawer fronts at $1,700–$3,100, a medium kitchen with 25–28 doors at $3,000–$5,700, and a large kitchen with an island at $4,000–$8,200. A bathroom vanity runs $300–$950.

Those are typical NYC market ranges for labor and materials in 2026, not DecoStyle quotes. We price cabinet painting in NYC and on Long Island after a free site visit, once we have counted your doors, checked what they are made of and agreed the paint and sheen.

Cost to paint kitchen cabinets in NYC, by door and kitchen size

What you're painting Typical NYC price Notes
Cabinet door, both sides $100–⁠$175 per door Sprayed finish. Most painters count doors and drawer fronts and include face frames and exposed sides in that price
Drawer front $40–⁠$80 each
Small kitchen or apartment galley (about 15 doors and 6 drawer fronts) $1,700–⁠$3,100
Medium kitchen (about 25–⁠28 doors and 10 drawer fronts) $3,000–⁠$5,700
Large kitchen with island (about 35–⁠40 doors and 12–⁠15 drawer fronts) $4,000–⁠$8,200
Bathroom vanity $300–⁠$950 Two to four doors plus drawers

Typical NYC ranges for labor and standard materials, reviewed November 2026. DecoStyle USA quotes after a free site visit.

Estimate your own kitchen in two minutes

Count every door and every drawer front, including the tall pantry, the cabinet over the fridge and the island. Multiply the doors by $100–$175 and the drawer fronts by $40–$80, then add the two.

For example, a kitchen with 20 doors and 8 drawer fronts works out to $2,000–$3,500 for the doors plus $320–$640 for the drawers: $2,320–$4,140 in all. Cabinet interiors, crown molding, decorative end panels and new hinges are usually priced as extras.

What moves cabinet painting cost

  • Door style. Shaker and raised-panel doors have more edges and corners to sand and coat than flat slab doors.
  • Condition. Cooking grease, old lacquer or varnish, and open-grain oak that needs filling for a smooth look all add hours.
  • The coating. Cabinet-grade enamels cost more than wall paint and wear far better.
  • Where the doors are sprayed. In NYC apartments doors are often sprayed off site, which adds pickup, delivery and, in an elevator building, a service-elevator booking.
  • Two tones. A navy or deep green island with white perimeter cabinets adds setup and masking.
  • Building logistics. Many co-ops and condos ask contractors for a certificate of insurance and limit work to weekday hours.
  • Older paint. Lead-safe containment and cleanup in pre-1978 homes add time (more on that below).

Free estimate

Want a quote for this?

DecoStyle USA does cabinet painting across NYC and Long Island. Free site visit, written quote.

Cabinet Painting in NYC

Painting vs refacing vs replacing kitchen cabinets

Painting is usually the cheapest of the three, because it keeps everything you already paid for: the boxes, the doors, the counters and the plumbing.

Item Painting Refacing Replacing
What's new Color and finish Doors and drawer fronts; veneer over the boxes and face frames Boxes, doors and drawers; often countertops too
Door style Same shape, new color Can change Can change
Layout Same Same Can change
Typical NYC cost $1,700–⁠$8,200 for most kitchens More than painting The most of the three
Disruption Doors off for several days; kitchen usable with care Boxes and counters stay in place Kitchen out of use through tear-out and installation

In a co-op or condo, a new kitchen usually needs the board's approval under an alteration agreement. Painting is normally treated as decorative work, though building rules on work hours, insurance and elevators still apply.

  • Paint when the boxes are solid, the layout works and the doors are sound.
  • Reface when the boxes are fine but the doors are damaged, warped or peeling, or you want a different door style.
  • Replace when the layout doesn't work, the boxes are water-damaged (often under the sink) or you are changing counters and appliances anyway.

What's included in a durable cabinet paint job

Painted cabinets rarely fail because of the color coat. They fail at the bond: paint over grease, a slick factory finish or sanding dust lets go at the edges and around the pulls. So a durable job is mostly preparation:

  1. Protect and remove. Counters, floors and appliances are covered; doors, drawer fronts, hinges and pulls come off and are labeled. Never paint around hardware.
  2. Degrease first, then sand. Insl-X's Cabinet Coat data sheet puts it plainly: always clean before sanding, so you don't drive contamination into the surface.
  3. Scuff-sand everything. Benjamin Moore's Advance instructions call for sanding all cabinet surfaces (220 grit or coarser) before priming and removing all dust; old glossy alkyd paint must be sanded dull.
  4. Repair. Dents and gouges are filled. If new pulls have different hole spacing, the old holes are filled now, before priming.
  5. Prime for the material. A bonding primer grips glossy and plastic-type surfaces: Insl-X Stix is made for glossy tile, PVC, vinyl and plastic and takes 3–4 days to cure fully. For MDF, thermofoil and laminate, Benjamin Moore lists its Fresh Start High-Hiding All Purpose Primer (046) under Advance.
  6. Two finish coats of cabinet enamel. Lightly sanded between coats, with the full recoat time respected: 16 hours for Advance.
  7. Rehang and adjust. Doors go back on with even gaps, drawers are aligned and the hardware is refitted.

Spray or brush?

Spraying gives the smoothest finish and is the usual choice for doors and drawer fronts; face frames are often brushed in place, since spraying them means masking the whole kitchen. The two main cabinet enamels behave differently: Advance stays workable longer and levels out like oil paint, while Cabinet Coat dries so quickly that overworking it leaves brush or roller marks, and its maker prefers HVLP for spraying.

Spraying indoors means masking off a room and keeping fresh air moving: Benjamin Moore says to use Advance only with adequate ventilation, with fresh air coming in while it is applied and while it dries.

Dry time vs cure time

Paint that feels dry is not yet hard. According to its technical data sheet, Advance is dry to the touch in 4–6 hours and ready to recoat in 16 at 77°F and 50% humidity, should be kept from heavy wear (and shelves kept empty) for at least 5–7 days, and can take up to 30 days to reach full hardness and final sheen. High humidity and cool temperatures stretch all of those numbers.

The best paint and sheen for kitchen cabinets

The best paint finish for kitchen cabinets is satin or semi-gloss, in an enamel made for cabinets rather than wall paint.

Satin, semi-gloss or high gloss?

  • Satin is the forgiving choice: Benjamin Moore rates it more stain-resistant and durable than lower sheens, and its softer shine hides small dents in older doors.
  • Semi-gloss is brighter. Benjamin Moore's guide to paint finishes calls it one of the best paint finishes for kitchen cabinets. It reflects more light, so the prep has to be better.
  • High gloss is the lacquered look, striking in ink green or navy. It cleans easily, but the same guide warns that gloss accentuates blemishes and needs careful application and preparation best left to a professional painter.
  • Flat wall paint is the wrong product. It is forgiving of flaws, but stains are harder to remove from low-sheen paint, and constant cleaning can burnish it. For a soft look, choose a low-sheen finish made for woodwork (see Flat Eggshell below).

The best paint for kitchen cabinets: which kind?

Type Example Cabinet sheens Recoat Good to know
Waterborne alkyd enamel Benjamin Moore Advance Satin, Semi-Gloss, High Gloss 16 hours Levels like oil paint, cleans up with water, cures hard. Yellows less than conventional alkyds, though slight yellowing can show in dark, poorly ventilated spots, mostly in light colors
Urethane acrylic enamel Insl-X Cabinet Coat Satin, Semi-Gloss 6 hours Fast and hard, and adheres to polyurethane and varnish without a primer once the gloss is sanded dull. Shows brush marks if overworked; not for stovetops or oven surfaces
Low-sheen eggshell for woodwork Farrow & Ball Flat Eggshell 20% sheen (Modern Eggshell, the shinier option, is 40%) Quick-drying; follow the label A soft, low shine; Farrow & Ball names kitchen cabinets among its uses and describes it as scrubbable and resistant to scuffs and stains

Which kitchen cabinet colors will look dated?

No color is safe from fashion, but the ones that date fastest were chosen because they were everywhere that year, not because they suit the kitchen. A cabinet color lasts when it works with what you are keeping: the countertop, the floor, the backsplash and the light the room gets.

  • Test against the counter. Paint a large sample board and hold it next to the countertop and floor, in daylight and at night under your own bulbs.
  • Judge it in your light. North light makes cool grays and whites look colder, and a windowless galley kitchen depends entirely on its bulbs.
  • Keep the strong color low. A deep green or navy island or base run, with lighter uppers, is easier to live with, and to change later, than a whole kitchen in one bold shade.

Our color consultation guide explains how to test samples well.

What can't be painted well

Most cabinets can be painted. A few shouldn't be and some need extra work first; we tell you which at the estimate.

  • Peeling or bubbling thermofoil. Thermofoil is a thin PVC film heat-formed over MDF, and heat and moisture can make it peel. Sound thermofoil can be primed and painted (Benjamin Moore lists a primer for it), but paint can't hold down film that is already coming loose, so those doors need replacing.
  • Lifting laminate or veneer. Firmly bonded laminate is paintable once deglossed, with a primer or enamel rated for it. Lifting edges are reglued first; badly delaminated panels are replaced.
  • Water-damaged sink bases. Particleboard that has swollen from a leak won't come back flat under paint. The leak gets fixed and the panel replaced.
  • Appliances, sinks and tubs. Cabinet Coat's data sheet rules out stove and oven surfaces and anything immersed in liquid.
  • Oak, if you want it smooth. Paint follows oak's open pores, so the grain texture still shows through. For a slab-smooth look, the pores are filled and sanded first, which adds a step and cost.
  • Old paint of unknown age. Older painted cabinets may hide lead paint under newer coats. In homes built before 1978, the EPA requires anyone paid to disturb paint to be certified and use lead-safe work practices, unless the job disturbs six square feet of paint or less per room (EPA RRP rule); sanding a kitchen's doors is far more than that. NYC adds rules for landlords: owners of buildings built before 1960 must presume paint is lead-based unless testing shows otherwise, and disturbing more than two square feet of it in an apartment where a child under six lives, or routinely spends 10 or more hours a week, requires safe work practices (NYC HPD). Ask how lead will be handled before anyone sands.

How long does it take to paint kitchen cabinets?

A typical kitchen takes about a working week, most of it waiting between coats. Every door has two faces, each needs primer and two finish coats, and with a 16-hour recoat each coat is an overnight wait. A typical sequence with Advance looks like this:

Day Work
1 Protect the kitchen; remove and label doors, drawer fronts and hardware; degrease, sand and repair; prime
2 First finish coat: door backs and face frames
3 Second coat: door backs and face frames
4 First finish coat: door and drawer fronts
5 Second coat: door and drawer fronts
6 Doors rehung, drawers aligned, hardware refitted

That is typical, not a promise. A faster-recoating enamel such as Cabinet Coat (6 hours) can shorten it; grain filling, cool or humid weather and a large kitchen lengthen it. Your quote should come with a schedule.

You don't need to move out: the boxes stay in place, you clear the counters, and you can usually keep using the sink and fridge. Repainting the rest of the apartment too? See our apartment painting cost guide and our interior painting service for walls, ceilings and trim.

Looking after painted cabinets

The first month matters most. Benjamin Moore's advice on cleaning freshly painted cabinets:

  • Wait. Don't use freshly painted cabinets for at least two to three days. They are fully cured in about 30 days; until then, only spot-clean spills, carefully.
  • Clean gently. A soft sponge, mild soap and slightly warm water, dabbing rather than scrubbing, then a soft towel.
  • Skip the harsh stuff. No abrasive sponges, melamine "magic eraser" sponges or scouring pads, and no bleach, ammonia or alcohol.
  • Keep moisture off. Don't hang wet dish towels over the doors.

Two habits of our own: open doors by the hardware, not the painted edge, and keep labeled leftover paint for touch-ups.

How to get an accurate cabinet painting quote

  1. Count. Every door and drawer front, as in the estimate above.
  2. Photograph. Each run of cabinets in daylight, plus close-ups of worn edges, peeling film or water damage.
  3. Know the material and the building. Wood, MDF, laminate or thermofoil; the year the building went up; and your co-op or condo's rules on insurance, work hours and elevators.
  4. Decide the extras. Interiors, crown molding, a two-tone island, new hinges or hardware.
  5. Compare like with like. Every quote should name the primer and enamel, the number of coats, where doors are sprayed, what the door price includes and a schedule.

DecoStyle USA paints kitchen cabinets, vanities and built-ins across Queens, Brooklyn, Manhattan, the Bronx, Staten Island, Long Island and Westchester. Send your door count and a few photos through our contact page, or read more about our kitchen cabinet painting service, and we will arrange a free site visit and estimate.

Questions

Frequently asked questions

Something we haven't covered? Call (332) 323-0909 or email us.

How much does it cost to paint kitchen cabinets in NYC?

Typical NYC prices are $100–$175 per door (both sides) and $40–$80 per drawer front: about $1,700–$3,100 for a small kitchen of 15 doors, $3,000–$5,700 for a medium kitchen of 25–28 doors and $4,000–$8,200 for a large kitchen with an island. These are typical 2026 market ranges for labor and materials, not quotes; DecoStyle USA prices each kitchen after a free site visit.

How much should I pay per cabinet door?

In NYC, expect $100–$175 per door with both sides painted, and $40–$80 per drawer front. Most painters include face frames and exposed box sides in the door price, so counting doors and drawer fronts gives a fair first estimate. Shaker doors, heavy grease, open-grain oak and off-site spraying push the price toward the top of the range.

Is it cheaper to paint or reface kitchen cabinets?

Painting is usually cheaper, because it keeps your doors, boxes and countertops and changes only the color and finish. Refacing replaces the doors and drawer fronts and veneers the boxes, so it costs more but lets you change the door style. If the doors are sound and you like their shape, paint them; if they are damaged, warped or peeling, reface or replace.

What is the best paint finish for kitchen cabinets?

Satin or semi-gloss, in an enamel made for cabinets rather than wall paint. Benjamin Moore calls semi-gloss one of the best paint finishes for kitchen cabinets, while satin's softer shine is more forgiving of dents in older doors. High gloss looks lacquered but shows every flaw, and Benjamin Moore says it needs preparation best left to a professional.

Should cabinets be painted flat or satin?

Satin, or a low-sheen finish made for woodwork, rather than flat wall paint. Stains are harder to remove from flat paint and constant cleaning can burnish it, which matters on doors that are handled and wiped every day. For a softer look than satin, Farrow & Ball Flat Eggshell (20% sheen) is a scrubbable woodwork finish the company names for kitchen cabinets.

Can laminate or thermofoil cabinets be painted?

Laminate can, if it is firmly bonded: it is deglossed and primed with a primer or enamel rated for laminate, and lifting edges are reglued first. Sound thermofoil can be primed and painted too, but film that is already bubbling or peeling, usually beside the oven or dishwasher, can't be held down by paint, so those doors need replacing.

How long does it take to paint kitchen cabinets, and when can I use them?

A typical kitchen takes about a working week, mostly waiting between coats, since both faces of every door get primer and two finish coats. Benjamin Moore advises against using freshly painted cabinets for two to three days, and its Advance enamel can take up to 30 days to reach full hardness, so go gently for the first month.

Keep reading

Related guides

All guides
  • Cost guide10 min read

    How Much Does It Cost to Paint an Apartment in NYC? (2026 Prices)

    How much does it cost to paint an apartment in NYC? Typically $1,500–$3,000 for a studio, $2,000–$4,500 for a one-bedroom, $3,500–$7,000 for a two-bedroom and $4,500–$10,000 for a three-bedroom. Those are typical…

  • Local9 min read

    Professional Home Color Consultation in Whitestone, NY

    A home color consultation in Whitestone is a visit where someone who knows paint looks at your rooms in their own light, asks how you use them, and helps you narrow thousands of colors down to two or three per room…

Free site visit & written quote

Book a free estimate

Tell us about the walls, the finish you have in mind and the timing. We'll come and look, then send a written quote.

Business hours

Monday – Friday
9:00 am – 7:00 pm
Saturday
9:00 am – 5:00 pm
Sunday
Closed
5.0from 9 Google reviews · read them on Google